VASALOPPET 2026

RACE

Glide

1. CLEAN & GLIDE
2. UP POLAR liquid (-5/-25)
3. TOP RACE VECTOR / RACE PINK powder (+3/-4)

Instructions

1. Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon.
2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon.
3. Rub on a thin layer of TOP RACE VECTOR, then apply RACE PINK powder on top and melt them together with a waxing iron (180 degrees). Let it cool, scrape, and brush out thoroughly. Start with steel to bring out the structure, then brush and polish with horsehair and nylon.

ACTIVE

Glide

1. CLEAN & GLIDE
2. UP POLAR liquid (-5/-25)
3. RACE LDR WHITE solid

Instructions

1. Start by cleaning the glide surface with CLEAN & GLIDE, let it dry, then brush with nylon.
2. Apply UP POLAR liquid. Let it dry thoroughly. Then brush out carefully. Preferably with horsehair and finish with nylon.
3. Melt on RACE LDR WHITE paraffin (160 degrees). Scrape and then brush out thoroughly. Preferably with steel, horsehair, and finish with nylon.

GRIP

1. KS BASE liquid klister
2. GT PINK (0/-4)
3. PURE RACE NEW SNOW PINK (-1/-5)

Instructions

1. Start by roughening the kick zone and apply a thin layer of KS BASE liquid. Let it dry thoroughly.
2. Then apply two thin layers of GT PINK, cork between each layer.
3. Then apply PURE RACE NEW SNOW PINK, number of layers as needed (3–5 layers), and cork between each layer.

SKIN

1. SKIN SKI CLEANER
2. SKIN CARE RED (+10/-1)

Instructions

1. Clean the skins thoroughly with SKIN SKI CLEANER and a polishing cloth. Then let them dry completely.
2. Apply SKIN CARE RED evenly over the surface to impregnate the skins and allow the product to dry properly before use.

Good luck!